Engineering flight. Defining the future.

Aerotec designs and builds drones in its R&D lab, flies them for power utilities, solar plants, surveyors and defence, and trains the people who will fly them next. Based in Thiruvananthapuram, working across India.

Survey missionLive simulation
Altitude
0.0m AGL
Ground speed
0.0m/s
Ground sample
1.6cm/px
Images
0
Coverage
0%
Position
8.5241° N 76.9366° E

One team from the lab bench to the flight line

Most drone companies build aircraft, fly missions or run courses. We do all three, and each makes the others better: field data shapes our designs, our designs make missions safer, and both feed what we teach.

Fly

Drone as a service

We bring the aircraft, the certified crew and the processing. You get data your engineers can act on, not a folder of raw photos.

Inspection drone with a dual RGB and thermal payload flying beside a high-voltage transmission tower
RGB and radiometric thermal payload on a transmission line inspection

Overhead transmission lines

Close-range inspection of towers, conductors, insulators and fittings, flown by a team that has inspected live high-voltage lines in the UAE since 2019. No shutdowns, no climbing, and every defect tied to a tower number.

What you receive

  • Tower-by-tower defect register with GPS and close-up images
  • Thermal hotspot report for joints, clamps and jumpers
  • Vegetation and ground clearance encroachment
  • Corridor LiDAR and as-built line models
  • Railway alignment and catenary surveys

SensorsZoom RGB, radiometric thermal, LiDAR

Build

Analytics that turn flights into findings

Our models review thousands of images per flight, flag defects, score their severity and place each one on the asset map. Your engineers review findings instead of folders.

Line 220 kV, span 114 to 115Scanning

Findings

0 of 5 flagged

    Every finding links back to its source image for engineer sign-off.

    What the models flag

    Thermal hotspots, broken strands, damaged insulators, missing components, corrosion, vegetation encroachment and solar module faults, trained on real inspection data.

    How findings reach you

    An online dashboard with maps and filters, plus PDF reports, Excel registers and GIS layers that drop into your maintenance systems.

    Built for repeat inspections

    Flights are planned to repeat exactly, so each inspection is compared with the last and you see which defects are new, worse or fixed.

    Build

    Aircraft designed around the mission

    Our R&D lab designs, prototypes and flight-tests UAV platforms, payloads and flight software in India, from a custom airframe for one client to platforms built for production.

    Technical front elevation drawing of a multirotor inspection drone with a gimbal payload
    ARTK GNSS and encrypted datalinkCentimetre positioning and AES-256 telemetry with frequency hopping
    BEdge AI flight computerOnboard neural processing for navigation and obstacle avoidance
    CPropulsion matched to the jobMotors, props and batteries sized for payload and endurance
    DHot-swappable payloadsLiDAR, thermal and radiometric RGB on one quick-release mount
    ProjectMultirotor inspection platform
    ViewFront elevation
    Drawn byAerotec R&D lab
    LocationThiruvananthapuram
    1. A
      RTK GNSS and encrypted datalinkCentimetre positioning and AES-256 telemetry
    2. B
      Edge AI flight computerOnboard neural processing for navigation
    3. C
      Propulsion matched to the jobSized for payload and endurance
    4. D
      Hot-swappable payloadsLiDAR, thermal and radiometric RGB

    Autonomous flight

    Edge AI navigation that plans, re-plans and avoids obstacles in real time.

    • Real-time 3D mapping and path planning
    • Dynamic rerouting in GPS-denied environments
    • Onboard neural processing unit integration

    Sensor payloads

    Plug-and-play integration for the sensors inspection and mapping work needs.

    • Synchronised multi-spectral sensor triggering
    • High-density LiDAR point cloud acquisition
    • Hot-swappable payload architecture

    Secure telemetry

    Long-range command and data links built for mission-critical operations.

    • AES-256 dual-layer encryption
    • Beyond visual line of sight (BVLOS) control
    • Anti-jamming frequency hopping

    How a new platform comes together

    1. Mission requirements

      We start from the job: payload, range, endurance, environment and the rules it must fly under.

    2. Design and simulation

      Airframe, propulsion and avionics designed in CAD and checked in simulation before anything is cut.

    3. Prototype and integration

      Composite and printed parts, avionics, payload and flight software built and integrated in our lab.

    4. Flight test and certification

      Instrumented test flights, iteration and documentation toward type certification under India's Drone Rules, 2021.

    Build

    Unmanned systems for defence and security

    We develop counter-drone, surveillance and tactical UAV technology for defence and homeland security, designed and built in India and grounded in years of aeromodelling work for the Indian Armed Forces.

    Counter-UAS

    Layered radar, RF and electro-optical detection, with RF and GNSS disruption that forces rogue drones to land safely.

    Persistent surveillance

    Tethered and long-endurance fixed-wing UAVs for round-the-clock perimeter, border and critical site security.

    Tactical platforms

    FPV and multirotor platform architectures with custom multi-sensor payloads, built for field conditions.

    Secure command links

    Encrypted, anti-jamming telemetry and control for contested electromagnetic environments.

    Discuss a defence requirement

    Defence projects are handled under the confidentiality and approvals each programme requires.

    Teach

    UAV University

    Everything UAV in one place: a certification course for future pilots, drone labs for schools and colleges, and hands-on engineering for anyone who wants to build.

    Drone pilot certification course

    A short-term course that takes you from ground school to a commercial specialism, taught by working pilots who fly inspection and survey missions.

    ClassroomSimulatorField flyingData processing
    1. Ground school

      Aviation law, airspace and air traffic management, and emergency procedures, aligned to the DGCA syllabus.

    2. Flight exercises

      Field training with manual throttle handling, mission flying and failsafe drills.

    3. Data analytics

      GIS and photogrammetry processing, plus powerline and solar inspection workflows.

    4. Specialist skills

      Commercial thermal inspection and land surveying on real project data.

    Students assembling a fixed-wing drone around a workbench in a lab
    Fixed-wing build session in a campus drone lab

    Drone labs for schools and colleges

    Turnkey STEM labs we set up, equip and support on your campus.

    • Assembly kits for frame building, ESC wiring and motor calibration
    • Autopilot coding with Python SDKs for autonomous flight and obstacle avoidance
    • Flight simulator stations that prepare students for real flying
    • Institutional partnerships with curriculum and trainer support

    Engineering workshops

    Hands-on sessions for students, hobbyists and professionals.

    • UAV design, assembly and tuning
    • Payload and sensor integration
    • Aeromodelling and fixed-wing builds
    Concept masterplan of the UAV campus with a testing runway, air traffic control tower, manufacturing and R&D buildings, administration, conference hall and hostels
    In planning

    A 20-acre UAV campus

    One site to design, build, fly and train: a UAV testing runway with air traffic control, manufacturing and R&D buildings, administration and a conference hall, and separate boys' and girls' hostels for residential courses. Keeping it all in one place shortens the path from idea to flight.

    Portrait of Vinod Madhavan, founder of Aerotec
    Vinod MadhavanFounder and promoter

    Led by people who fly

    Aerotec is an engineering company in Thiruvananthapuram, Kerala, established in 2017 and built on years of hands-on UAV operations.

    Founder Vinod Madhavan is a DCAA and FAA Part 107 certified RPAS pilot with more than 15 years of experience flying fixed-wing and multirotor UAVs. He has led drone missions at regional, national and international level, including overhead transmission line inspection in the United Arab Emirates since 2019, as well as agriculture, pollution detection, survey mapping and emergency missions. He is also an accomplished aeromodeller whose work includes projects for the Indian Armed Forces.

    Flying UAVs
    15+ years
    OHTL inspection in the UAE
    Since 2019
    Pilot certifications
    DCAA, FAA Part 107
    Scale aeromodels built
    1:170 to 1:30

    Sectors we serve

    • Power transmission
    • Solar and wind
    • Telecom
    • Railways
    • Infrastructure and construction
    • Government and defence
    • Schools and universities

    Tell us about your mission

    Share what you need inspected, mapped, built or taught, and where. We'll come back with an approach, a timeline and a quote.

    Office
    Koora 33, Mini Vihar, Kottamvilla Road
    Vettamukku, Thiruvananthapuram
    Kerala 695013, India

    We only use your details to reply to this enquiry.